| GPS Engine Board MODEL: MN1010 Consists of U-nav chip with LNA, SAW Filter available for customized applications in firmware Features:
l Complies with National Marine Electronics Association(NMEA)0183 Standard l Fully integrated single module solution for GPS system l 12 channel GPS receiver with fast acquisition l Defaults to standard NMEA 0183 serial 4800 bps. Configurable to other baud rate from 4800 to 115K bps. l Adaptive Multi-path Rejection Algorithm l Supports both Active and passive Antenna l Metallic enclosure，proven RF interference-free design l 10 by 10 mm，2 mm thickness in 36 pin LGA package(1 mm pitch) l Dual voltage operation : 3.0±3V and 1.8V DC supply l Low power consumption l Lead free l Full industrial temperature specifications of? 0 to + 85℃
Applications: l Automotive applications l Personal positioning and navigation l Mobile and PDA applications, etc Specifications: Acquisition at low signal levels | Cold | 43 sec.(typical) | warm | 38 sec.(typical) | Hot start | 3 sec.(typical) | Tracking sensitivity | -151dBm (at the receiver input) | Re-acquisition Time | 3sec. typical (within 5sec. Block out) | 5sec typical (within 60sec block out) | Position Accuracy | Accuracy (SA off) | Position <5meters ,2D RMS. | Receiver | Receiver type | L1 frequency , C/A Code, 12-channel | Max. Update rate | 1HZ | Operational Limit Altitude | < 18,000m(60,000ft) | Operational Limit Velocity | < 515m/s(1,000knots) | Protocol Support | NMEA-0183 | Activated message | GLL, GGA, RMC, VTG, GSV, GSA all with checksum | Operating Humidity | 5% to 95%, No Condensing | Dimension | 10mm x 10mmx 2mm | Electrical | Operating supply | 1.8V~3.6V DC | Supply current (at 3.3V DC.) | ±50mA (TYP.) | Storage temperature | -55℃~100℃ | Operating temperature | -40℃~+85℃ |
＊This specification is subject to change without prior notice |
